| Control humidity automatically and
accurately with Green Air Products Total
Humidity Controller. The THC can
be switched between humidify and dehumidify
for removing unwanted atmospheric moisture
accumulating within an enclosed area
or to add needed moisture to the air
by means of humidification. The THC-1
humidity switch controls humidity equipment
by providing power when humidity varies
from the adjustable set point.
In the dehumidifying mode high humidity
conditions will activate fans or other
dehumidifying apparatus until level
drops approximately 5%. At this point
dehumidifying equipment is disabled
until humidity increases again 5%. |
| In the humidifying mode this control
operates fogging or other humidifying
equipment by activating switches, motors,
valves or pumps. Humidifiers can be
precisely controlled according to atmospheric
humidity to create ideal conditions
for any environment. The 110V outlet
receptacle receives power when atmospheric
moisture content becomes less then your
preset minimum allowable percentage.
Switches 120V at 15 amp maximum.
Sensor allows a 5% (differential)
comfort zone between "on" and "off"
functions.
If your humidifier or dehumidifier
already has a humidity control, turn
it to full on position and set the
humidity dial to your minimum desired
level. The THC-1 can also be used
with many other types of humidity
equipment or any other electrically
triggered appliances. |
