| |
|
| |
|
| |
FINE
SPRAY NOZZLES |
| |
| We are offering a wide range
of high quality PRODUCTS, SERVICES and SYSTEMS of
world class technology to the total satisfaction
of customers in DOMESTIC and OVERSEAS markets. |
|
| |
Description
: |
Low flow,
fine atomizing humidifying nozzles for misting systems,
pest control spray for home, agriculture and industry.
Atomizing nozzles are available in various grades
of stainless steel, as well as brass. |
|
| |
Description
: |
Type
M mini Brass or stainless steel miniature spray
nozzles are a perfect solution where small size,
accurate flow rates, very fine atomization and low
cost are desired. 1/8" NPT male thread in flow
rates from 1.00 through 15.0 GPH. Type M (80°
spray angle) and the wide angle version, Type MW
(160° spray angle) find applications installations
as green houses, industrial and residential humidifying
and poultry and hog cooling and misting of all types.
Flow rates in GPH (Gallons
per hour U.S.) at various operating pressure &
M-series Price
|
| NOZZLES |
40
psi |
60
psi |
80
psi |
100
psi |
200
psi |
300
psi |
500
psi |
Price/Pc
416 S.S |
Buy
Now
Min
Qty 10 Pc |
| M1 |
0.63 |
0.77 |
0.89 |
1.00 |
1.41 |
1.73 |
2.24 |
3.29
|
|
M2 |
1.26 |
1.55 |
1.79 |
2.00 |
2.83 |
3.46 |
4.47 |
3.39
|
|
M3 |
1.90 |
2.32 |
2.98 |
3.00 |
4.24 |
5.20 |
6.71 |
3.49
|
|
M4 |
2.53 |
3.10 |
3.58 |
4.00 |
5.66 |
6.93 |
8.94 |
3.59
|
|
M5 |
3.16 |
3.87 |
4.47 |
5.00 |
7.07 |
8.66 |
11.18 |
3.69
|
|
M10 |
6.32 |
7.75 |
8.94 |
10.00 |
14.14 |
17.32 |
22.36 |
3.89
|
|
M15 |
9.49 |
11.62 |
13.42 |
15.00 |
21.21 |
25.98 |
33.54 |
3.95
|
|
MW5 |
3.16 |
3.87 |
4.47 |
5.00 |
7.07 |
8.66 |
11.18 |
4.05
(Brass) |
|
MW5 |
3.16 |
3.87 |
4.47 |
5.00 |
7.07 |
8.66 |
11.18 |
6.19
(Nickel-silver) |
|
MW7 |
4.43 |
5.42 |
6.26 |
7.00 |
9.90 |
12.12 |
15.65 |
5.10
(Brass) |
|
MW11 |
6.96 |
8.52 |
9.84 |
11.00 |
15.56 |
19.05 |
24.60 |
6.99
(Brass) |
|
MW15 |
9.49 |
11.62 |
13.42 |
15.00 |
21.21 |
25.98 |
33.54 |
ON
REQUEST |
|
ADAPTERS |
- |
- |
- |
- |
- |
- |
- |
- |
|
1/8-NPT |
- |
- |
- |
- |
- |
- |
|
2.19(Brass) |
|
1/8"x
1/4" |
- |
- |
- |
- |
- |
- |
- |
2.19(Brass) |
|
|
|
| |
| Image
: |
|
Description
: |
Originally
designed for use with home power spray humidifiers,
these nozzles produce the finest possible atomization
with direct water pressure operation. Minimum operating
pressure is 40 psi but increasingly finer droplets
result from higher operating pressures. Flow rates
are tested and calibrated at 40 psi, water.Standard
spray angle is 70°. The extremely fine atomization
of the Type B nozzle has resulted in it’s
adoption for many uses where fine atomization and
precise flow rates are required such as evaporative
cooling, humidification, moistening and misting.
Flow rates in GPH( Gallons
per hour U.S.)at various operating pressure &
B-series Price Material: Stainless Steel |
Nozzle
P/n |
40
psi |
60
psi |
80
psi |
100
psi |
200
psi |
300
psi |
500
psi |
Price/Pc
416 S.S |
Buy
Now
Min
Qty 10 Pc |
| B 37 |
0.37 |
0.45 |
0.52 |
0.59 |
0.83 |
1.01 |
1.31 |
3.49 |
|
| B 50 |
0.50 |
0.61 |
0.71 |
0.79 |
1.12 |
1.37 |
1.77 |
4.09 |
|
| B 75 |
0.75 |
0.92 |
1.06 |
1.19 |
1.68 |
2.05 |
2.65 |
4.19 |
|
| B100 |
1.00 |
1.22 |
1.41 |
1.58 |
2.24 |
2.74 |
3.54 |
4.49 |
|
| B150 |
1.50 |
1.84 |
2.12 |
2.37 |
3.35 |
4.11 |
5.30 |
4.59 |
|
| B200 |
2.00 |
2.45 |
2.83 |
3.16 |
4.47 |
5.48 |
7.07 |
4.69 |
|
| B-300 |
on
request |
on
request |
on
request |
on
request |
on
request |
on
request |
on
request |
on
request |
on
request |
| Adapter
9/16"-1/8"-
NPT |
|
|
|
|
|
|
|
$
2.29 (Brass) |
|
| Adapter
9/16"-1/4"-
NPT |
|
|
|
|
|
|
|
$
2.29 (Brass) |
|
|
|
| |
| Image
: |
|
Description
: |
Many
nozzles are good for spraying liquids, but for a
positive drop-less after shut-off , you need Type
# 4023, This nozzle is ideal to the industry and
is the solution when a positive shut off with absolutely
no after drip is needed. The #4023 nozzle is the
perfect solution when after drip could damage or
destroy things beneath the nozzle. Chemicals, insecticides
and even plain water, if allowed to drip, can foul
the environment and kill or injure poultry birds,
livestock, seedlings or industrial materials.This
exclusive design produces a fine mist with a precisely
controlled flow rate and spray angle, but also with
a liquid cut-off at the orifice, while maintaining
supply pressure in the system. This assures sputter
free start ups and no entry of air into the system
during the off cycle. With this nozzle there is
no need to install costly individual in-line check
valves.Standard flow rate is 0.59 GPH @ 100 psi
to 1.33 GPH @ 500 psi , water. Spray angle: 70°degree.
Flow rates in GPH(
Gallons per hour U.S.)at various operating pressure
-Type# 4023 series & Price |
| Item |
100
psi |
160
psi |
200
psi |
250
psi |
300
psi |
400
psi |
500
psi |
Price/Pc
$ |
Buy
Now
Min
Qty 10 Pc |
| # 4023 Nozzle |
0.59 |
0.75 |
0.84 |
.94 |
1.02 |
1.19 |
1.33 |
7.29
(416ss) |
|
| Adapter
9/16"-1/8"-NPT |
- |
- |
- |
- |
- |
- |
- |
2.29
(Brass) |
|
| Adapter
9/16"-1/4"-NPT |
- |
- |
- |
- |
- |
- |
- |
2.29
(Brass) |
|
|
|
| |
Description
: |
Type
ASW series of air operated nozzles provide very
fine atomization at higher flow rates ranging from
1 to 900 GPM when used with water and compressed
air. Available in three different flow rate ranges,
they are commonly used for gas cooling, scrubbing
and various industrial processes. The ASLW offers
flow rates of from 1 - 4 GPM, the ASMW from 5 -
10 GPM and the ASHW from 12 - 15 GPM. These nozzles
achieve finer atomization and with lower compressed
air consumption than competitive nozzles. Their
5:1 turndown ratio and total spray angle fluctuation
of only 5° provides a very wide range of acceptable
performance. |
|
| |
Description
: |
The Type
RFLW return flow or spill back nozzles are offered
in flow rates of 50 GPH to 300 GPH on water @ 300
psi. These nozzles offer a means to vary flow rates
with constant supply pressure over a turn down range
of 5:1 by returning or by-passing some of the liquid
from the nozzle’s interior, back to the incoming
liquid’s reservoir. When the by-pass line
is closed the nozzle acts as a simplex nozzle, delivering
it’s rated capacity. A unique feature of these
nozzles is their ability to maintain a small change
in spray angle (10°) across the entire operating
range. The RFLW nozzles allow an accurate and predictable
flow rate due to linear and uniform relationships
between spill back pressure and orifice flow. Standard
material of construction is type 316 stainless steel. |
|
Oil Burner Nozzles |
| |
| Image
: |
|
Description
: |
Developed
and refined over many decades, these nozzles represent
the state-of-the-art in the industry. They are fabricated
entirely (except for filtration materials) of a
special high chrome, heat and corrosion resistant
stainless steel. Our quality control program is
second to none -- every nozzle is oil-tested for
uniform flow rate, spray angle, spray concentricity,
spray balance and spray quality. Simplex nozzles
are available in various spray patterns and flow
rates ranging from .40 to 120.0 GPH in standard
sizes and angles. Special flow rates, angles and
materials are also available on request. |
|
| |
| Image
: |
|
Description
: |
Also
known as "variable flow" nozzles, these
are nozzles capable of producing turndown ratios
of 4:1. these by-passing nozzles (Type BPS) are
unique in that they maintain a very steady spray
angle across the entire turndown range. Other brands
often vary as much as 15 degrees from open to closed
by-pass line. Additionally, our nozzles produce
a straight line "Curve" of pressure vs.
flow, thereby allowing an enhanced control of flow
modulation. |
|
| |
| Image
: |
|
Description
: |
A complete
line of Air Operated, Direct Pressure, and Return
Flow nozzles for firing rates up to 600 GPH. These
nozzles embody the expertise gained from over five
decades of designing and manufacturing oil burner
nozzles. |
|
| |
Prices
for above items on request |
